In the kit:

• N.1 Profoto OCF II Grid and Gel Holder
• N.1 Profoto OCF II Grid (20°)
• N.1 Profoto OCF II Gel (Full CTO)
• N.1 Profoto OCF II Gel (Half CTO)

Compatible with the B1X, B1, B2, B10, D1, and D2 Flash Heads, the OCF Zoom Reflector from Profoto allows you adjust the beam angle of these lights from 55 to 85 degrees by moving the reflector back and forth along the body of the light. The highly reflective modifier will boost the output to 1.2 stops. While at just 6" in diameter, it's small enough to fit into the Profoto Backpack M, Bag XS, or Bag S Plus while mounted on a head.

Designed for use on the B10, B10 Plus, an B1X, this Profoto OCF II Grid and Gel Kit contains frequently used gels and a grid for narrowing the light's beam spread. The kit includes a Grid and Gel Holder with magnetic mount, Full and Half Gel filters for warming the color temperature and a 20° grid for eliminating spill and narrowing the light's beam spread.

Profoto OCF II Grid and Gel Holder
Designed for the B10, B10 Plus, and the B1X, the OCF II Grid and Gel Holder from Profoto has an integrated magnetic mount that allows fast attachment of gels or grids or stacking of the two.

Benefits

• Mounts directly onto all Profoto Off-Camera Flashes (OCF)
• Integrated magnetic mount for OCF II Gels and Grids.

Profoto OCF II Grid (20°)
Designed for the B10, B10 Plus, and B1X, the Profoto 20° OCF II Grid narrows the approximately 77° beam spread of the fixture for selective lighting. The grid attaches magnetically to the OCF II Barndoor or the OCF II Grid and Gel Holder and can easily be stacked with OCF II gels. This 20° grid substantially narrows the light's beam spread. There is also a wider 30° grid and a narrower 10° grid.

Benefits

• Attaches with magnets onto OCF II Grid and Gel Holder or OCF II Barndoor
• Easy to stack with OCF 11 Gels

Profoto OCF II Gel (Full CTO)
Designed for use with the B10, B10 Plus, and B1X, this amber Profoto OCF II Full CTO Gel Filter mounts magnetically to the OCF II Grid and Gel Holder or the OCF II Barndoor. The filter is generally used to convert the light's approximately 5500K daylight color to about 2900K tungsten balance to match other fixtures or ambient light conditions. The filter easily stacks with optional grids for selective lighting.

Profoto OCF II Gel (Half CTO)
Designed for use with the B10, B10 Plus, and B1X, this amber Profoto OCF II Half CTO Gel Filter mounts magnetically to the OCF II Grid and Gel Holder or the OCF II Barndoor. The filter warms daylight 5500K to about 3800K tungsten balance for a late afternoon effect or for use as a hair or accent light. The filter easily stacks with optional grids for selective lighting.